Printable checklist
Clean air and floors for critical equipment
Servers and network gear pull room air through themselves around the clock, and every bit of dust, fiber or concrete grit in that air ends up on fans, filters and circuit boards. Regular, controlled cleaning keeps particulates down, keeps cooling paths clear and gives auditors and customers touring the floor a room that looks as dependable as it runs. Aeroso cleans data centers, colocation suites and on-site server rooms in Redwood City and Menlo Park to the operator’s own procedures.
Each site gets a plan split by zone. The white space follows your procedures step by step, while the office wing, operations center, break rooms, restrooms and loading dock receive a recurring commercial routine. Keeping those methods apart means the right tools, materials and pace are used in every room.
Data centers on the Peninsula
Data halls and server rooms are spread across the Peninsula. Redwood City still has colocation buildings of its own, where carriers and tenants share secured data halls.
Beyond those colocation buildings, server rooms also sit inside corporate campuses, office parks and research buildings in Menlo Park. A single equipment room on a lab or office floor needs the same careful method as a full data hall, and both are planned the same way.
Access, escorts and gowning
Data centers control who enters and where they go, and the cleaning crew fits right into that system. Crew members are background-checked, sign in at the security desk, carry the badges your site issues and work under escort wherever your procedures call for one. Visit windows are booked ahead so your operations staff know exactly when the crew is on the floor.
Before entering the white space, the crew puts on the shoe covers, coats or other garments your procedure lists, steps across the tacky mats and brings in only the tools approved for the room. Cleaning carts are wiped down before they cross the threshold, and nothing stays behind after the visit.
White space cleaned to your procedures
Inside the data hall, cleaning moves from top to bottom so falling dust is always caught below. Cabinet tops, cable trays within reach, overhead ladder racks, door frames and wall surfaces are cleaned first with low-lint wipes and HEPA-filtered vacuums, then perimeter walls, cold-aisle doors and finally the floor. Your procedure decides which equipment surfaces are touched and which are left to your technicians.
Products are chosen for the room: anti-static solutions on floors, damp microfiber rather than sprays near equipment, and no aerosols or powders in the hall. Floor tiles are damp-mopped with clean water changed often, and perforated tiles are vacuumed so airflow stays open.
Raised floors and under-floor areas
Under a raised floor, dust, cable ties, packaging scraps and construction debris collect where nobody looks, until cooling air lifts them back into the room. Under-floor cleaning lifts tiles in the order and number your procedure allows, using suction lifters, then HEPA-vacuums the slab, the pedestals and the cable pathways before each tile is wiped and set back in place.
Plenums are usually cleaned on a scheduled cycle, with the floor surface done far more often. After a deployment or an equipment move, a project clean clears the boxes, foam and fine dust the work left behind, so the room is back to its normal condition before the new gear goes live.
Support spaces around the data hall
The rooms around the hall matter too. Operations centers and offices get desk, screen and phone wiping, carpet vacuuming and bin service, break rooms and restrooms are cleaned and stocked, and corridors and mantraps are kept free of grit that would otherwise be tracked toward the hall.
Loading docks and staging rooms see cardboard, pallets and dust from every delivery. Dock floors are swept and scrubbed, and staging areas are cleaned so equipment is unboxed in a clean space before it moves inside. Hard floors in these areas can be scrubbed and refinished through commercial floor care on a scheduled night.
What sets the price of data center cleaning
Data center cleaning is priced from the site’s own layout and rules. The main factors are the square footage of white space compared with offices and support rooms, the raised-floor area, how often the under-floor is done, escort and access windows, after-hours scheduling, and any project cleans after deployments.
A walkthrough with your facilities or operations team gives us the procedures, zones and windows we need, and the price follows them room by room.
A few useful answers
Common questions
Does your crew follow our data center’s access procedures?
Yes. Crews sign in, wear your badges, work under escort where required and keep to the visit windows your operations team books.
How is the area under a raised floor cleaned?
Tiles are lifted in the order your procedure allows, the slab and pedestals are HEPA-vacuumed, and each tile is wiped and reset.
Can you clean after new equipment is installed?
Yes. A project clean removes packaging, foam and fine dust after a deployment, so the room is back in shape before the gear goes live.
Do you clean the offices and dock as well as the server rooms?
Yes. Offices, operations rooms, restrooms, break rooms and the loading dock follow a commercial routine alongside the server-room routine.
Industries

